---
title: How to update?
description: "Table Of Contents - [Upgrade procedure](#0-toc-title) - [Step 1](#1-toc-title) - [Step 2](#2-toc-title) - [Step 3](#3-toc-title) - [Step 4](#4-toc-title) - [Step 5](#5-toc-title) - [Step 6](#6-toc-title) - [Step 7](#7-toc-title) - [Verifying versions](#8-toc-title) ### Upgrade procedure Follow these steps to update the firmware…"
url: "https://docs.mjpaudiodesigns.com/docs/how-to-update/"
updated: "2026-06-05"
category: Software Release
---

# How to update?

Table Of Contents

- [Upgrade procedure](#0-toc-title)
  - [Step 1](#1-toc-title)
  - [Step 2](#2-toc-title)
  - [Step 3](#3-toc-title)
  - [Step 4](#4-toc-title)
  - [Step 5](#5-toc-title)
  - [Step 6](#6-toc-title)
  - [Step 7](#7-toc-title)
- [Verifying versions](#8-toc-title)

### Upgrade procedure

Follow these steps to update the firmware on your Ground Central and Satellites.

#### Step 1

Download the **latest software release** from the **Software Releases** page [here](https://docs.mjpaudiodesigns.com/docs/releases/). Once downloaded, look for the **MJP Remote App** inside the **Remote app** folder and follow **Step 2**.

Now uncompress the ZIP file, e.g. **constellation_v1.0.1.zip**.

#### Step 2

Open the **MJP Remote app** located inside the **Remote app** folder.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/constellation_app_loadfile-1024x630.png)

#### Step 3

Connect the **Ground Central** to your computer via the supplied **USB-C**cable.

#### Step 4

Once the App open, press **LOAD FILE** and select the ZIP file, e.g. **constellation_v1.0.1.zip**:

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/05/Screenshot-2026-06-05-at-10.04.22-AM-1024x639.png)

#### Step 5

Make sure the Satellites are placed **as close as possible**, ideally on top, of the Ground Central.

⚠️ Only if running firmware v1.0.0 – Turn only the Pink Satellite on. The rest of the Satellites should be powered off.

#### Step 6

Press **UPDATE** to start the firmware update.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/constellation_app_upload_satellite-1024x628.png)

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/updating.png)

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/updated.png)

ℹ️ Once the process is complete, the Satellite will be turned **Off**. Turn it **On** and wait until the LED stops blinking.

#### Step 7

⚠️ Only if running firmware **v1.0.0** – If you have more than one Satellite, turn the rest of the Satellites on, **one at a time while the rest is off**, and run the Step #6 again until all Satellites have been updated.

---

### Verifying versions

After updating, you can check the installed firmware versions (see reference images below):

- **Ground Central**: Go to the **global three-dot menu**.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/firmware-1024x576.jpg)

- **Satellite**: Open the **three-dot menu** inside the Satellite view, then tap **Satellite Configuration**.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/08/satellite-firmware-1024x576.jpg)