---
title: Sound Library
description: "### Selecting and triggering sound samples Constellation comes with a collection of pre-loaded **samples** that can be triggered using **motion control**. [CONSTELLATION | Walkthrough Triggering Samples](https://www.youtube.com/embed/FKzo6MU3GVk?feature=oembed) To access these samples, tap the three dots in the top-right corner of any…"
url: "https://docs.mjpaudiodesigns.com/docs/sound-library/"
updated: "2025-08-28"
category: Initial Setup
---

# Sound Library

### Selecting and triggering sound samples

Constellation comes with a collection of pre-loaded **samples** that can be triggered using **motion control**.

[CONSTELLATION | Walkthrough Triggering Samples](https://www.youtube.com/embed/FKzo6MU3GVk?feature=oembed)

To access these samples, tap the three dots in the top-right corner of any **Satellite** view and navigate to **Sound Library**.

Here, you’ll find a variety of percussion sounds, from claps to snares.

Once you’ve selected a sample, you’ll see its control options. You can:

- Enable or disable the sample
- Adjust its volume level
- Assign a control input such as Roll
- Fine-tune parameters like Sensitivity, Invert toggle, Attack, and Decay

Adjust the **Threshold** to set the point at which the sample is triggered, based on the selected **input control**.

The selected sample is then added to your main audio signal, and you can monitor it through the headphone output.