---
title: TouchDesigner
description: "[CONSTELLATION and Touch Designer - How to integrate?](https://www.youtube.com/embed/w027EeHS5TA?feature=oembed) In TouchDesigner, you can use motion data captured by the Satellite devices to control parameters via the **MIDI In CHOP** operator in your TouchDesigner network. After your system recognizes the Ground Central…"
url: "https://docs.mjpaudiodesigns.com/docs/touchdesigner/"
updated: "2025-08-07"
category: Integrations
---

# TouchDesigner

[CONSTELLATION and Touch Designer - How to integrate?](https://www.youtube.com/embed/w027EeHS5TA?feature=oembed)

In TouchDesigner, you can use motion data captured by the Satellite devices to control parameters via the **MIDI In CHOP** operator in your TouchDesigner network.

After your system recognizes the Ground Central as a MIDI device, follow these steps in TouchDesigner:

1. Open your TouchDesigner project.
2. Navigate to the **MIDI Device Mapper** (Dialog).
3. Create a new MIDI mapping.
4. Set your Constellation MIDI device as both the **input** and **output** device.

If your Satellite is paired and you’ve enabled MIDI messages in Ground Central’s settings, you should begin seeing MIDI data populate the **MIDI Console** within the MIDI Mapper dialog.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/05/midi2.png)

Now return to your TouchDesigner network:

1. Press **Tab** to open the operator menu.
2. Create a **MIDI In CHOP** operator.

That’s it! You should now see real-time MIDI data streaming from Ground Central into the operator. From here, you can connect and map this output to control any transform, effect, or parameter within your TouchDesigner project.

![](https://docs.mjpaudiodesigns.com/wp-content/uploads/2025/05/midi2.2.png)